Concrete Experts stabilization systems utilizes a carbon fiber/kevlar grid that will halt any further movement of the concrete or CMU block wall.

Sand Blasting.   We use pressure up to 8,000 psi, enough to remove any coating.

Ground Penetrating Radar.   (down to 30 feet) Used to locate voids, old fuel tanks, cables, and other debris buried in the ground.

Concrete Penetrating Radar.  (down to 18 inches)  Used to locate steel rebar, PT cables, electrical cables, voids and other anomalies in the concrete.

Used to analyze concrete pours, such as foundation wall, concrete floors or any other concrete placement for voids and rock pockets that are not located at the surface.

This is used to show moisture and mold damage. It will also show insect colonies from generated heat. Very useful in home inspections to spot damage that is not showing through.

Concrete Crack Repair.  Using state of the art carbon fiber countersunk staples, fiberglass rebar, steel all thread, just to name a few, Concrete Experts can repair any type of concrete crack.

Structural Crack Repair.  Very similar to crack repair, but incorporating both concrete stitching and epoxy injection.

Concrete Stitching.  Drilling at a 45 degree angle across the crack, alternating from side to side, placing steel all thread with epoxy, cracks are mended together, to keep from moving.

Epoxy Injection.  This is using either low or high pressure pumps to inject epoxy into cracks or voids in concrete.

Using a combination of old techniques and modern materials, we can permanently lift sidewalks and patios back to the level they were meant to sit. Mud jacking only goes so far as inevitably the slurry with erode away just like the dirt before it.

Injecting a soil stabilization gel into the ground to solidify and fill voids or loose soil.

Acid Staining.  Using a permanent penetrating acid stain to achieve an artist molded look of uncompromised beauty.

Concrete Polishing.  Starting with a 50# grit diamond pad and finishing with up to a 3000# pad to achieve the results and beauty of polished concrete.

Using either a hydrophilic or hydrophobic water activated polyurethane chemical grout to stop water intrusion.

Using water activated polyurethane chemical grouts, water is permanently stopped.

Used to measure the degree of corrosion forming on steel rebar.